# Bartlett Audio

> We make stage-floor microphones for amplifying actors on stage. They are far simpler to use, and less costly, than headworn wireless mics. We also make clip-on mics for acoustic instruments for sound reinforcement at gigs. They sound natural, better than a pickup. Easy temporary mounting and low fee

- **Category:** Shops & Retail
- **Website:** https://www.bartlettaudio.com/
- **Address:** Bartlett Audio, 23 Highland St., Weaverville, NC 28787
- **Country:** United States
- **Email:** info@bartlettaudio.com
- **Web shop:** Web shop on Shopify: 14 products, $0.95–$291.95
- **Ships to:** United States
- **Contact page:** https://www.bartlettaudio.com/pages/support

## About
"One of the best parts of my job is talking one-on-one with a customer – whether it's a fiddle player, guitarist, sound engineer, or music director, it's great to help them with their audio problems." – Bruce Bartlett, manager/engineer Our company was formed in 2009 to design and build high-quality microphones at a fair price, and to offer excellent customer support direct from the designer. In 2012 Bartlett Microphones became Bartlett Audio, featuring new mic circuits for even better performance. Each of our mics is voiced or tuned for a specific instrument: fiddle, guitar, banjo, mandolin, cello , nykelharpa, and bass.

## What they sell
Sells: Instrument Mics, Featured Products, Stage Floor Mics (for amplifying actors or percussive dance)
Price range: $0.95–$291.95 (14 products, 12 shown here)

- custom payment (for custom orders or repairs): $0.95 (in stock) — https://www.bartlettaudio.com/products/custom-payment
- Acoustic Bass Guitar Mic: $208.95 (in stock) — https://www.bartlettaudio.com/products/acoustic-bass-guitar-mic
- Ukulele Mic: $208.95 (in stock) — https://www.bartlettaudio.com/products/ukulele-mic
- Wireless-ready mic modification: $55.95 (in stock) — https://www.bartlettaudio.com/products/fiddle-mic-wireless
- Open-Wide Mic Clip: $23.95 (in stock) — https://www.bartlettaudio.com/products/open-wide-mic-clip
- Nyckelharpa Mic: $208.95 (in stock) — https://www.bartlettaudio.com/products/nyckelharpa-mic
- Stage Floor Mic-EC (Enhanced Clarity): $291.95 (in stock) — https://www.bartlettaudio.com/products/stage-floor-mic-ec-enhanced-clarity
- Cello Mic-LB (for loud bands): $208.95 (in stock) — https://www.bartlettaudio.com/products/cello-mic-lb-for-loud-bands
- Bass Mic: $208.95 (in stock) — https://www.bartlettaudio.com/products/bass-mic
- Fiddle Mic: $208.95 (in stock) — https://www.bartlettaudio.com/products/fiddle-mic
- Mandolin Mic: $208.95 (in stock) — https://www.bartlettaudio.com/products/mandolin-mic
- Cello Mic: $208.95 (in stock) — https://www.bartlettaudio.com/products/cello-mic

Products as published by the shop (read from the shop 2026-11-22; the shop last changed its products 2026-11-22; last change seen here 2026-11-22); prices and stock change.

## Prices
- L.R. Baggs Align Equalizer pedal: $179
- Fishman preamps with EQ: $169-$319

## Frequently asked questions

**Products**
Products Instrument Microphones All Products Stage Floor Microphone

**Knowledge**
Knowledge Learn About Audio FAQ - Instrument Mics FAQ - Stage Floor Mics

**Share**
Link Close share Copy link

**How do I connect a Bartlett Mic to my mixer, amp, DI, or stomp box?**
Check your mixer or amp's manual to see if the device has phantom power. Or look for a switch labeled "Phantom", "P48", or "48V". Most instrument amps do not have a phantom power switch; it's always on.Many acoustic instrument amps supply phantom power, such as the Fishman Loudbox Artist, Marshall AS50D or Acoustic Image Coda/Ten2. The Fishman Loudbox Micro and Fishman Loudbox Mini lack phantom power but they will work if you add a phantom power supply.If your device has phantom power, simply plug the mic into the XLR (3-hole) mic connector and turn on phantom power (unless it's always on).If

**Why the different models? Won't one mic work on everything?**
How can I avoid tangling the mic cable?Wrap the cable in figure-eights around your index finger and pinkie, then wrap the cable with the supplied Velcro strap.

**How can I turn off the mic when I want to tune my instrument?**
Rolls MM11-ProWhirlwind MicMutePro Co Sign Off microphone on-off switch box

**Does cutting frequencies with a graphic equalizer give more volume before feedback starts?**
What are some preamps with phantom power that let you adjust EQ on stage?:Headway EDB-2 preamp. It has an XLR mic input with phantom power.Grace Design Felix 2 preamp. It also has an XLR mic input with phantom power, plus 1/4" jacks for pickups.Warm Audio W7A3-EQPresonus Studio channel

**How can I avoid running the mic's thin cable across the stage?**
How do I make my Bartlett microphone wireless?Let me know which Bartlett mic model you have or want to get. Email me at info@bartlettaudio.com. For $60, I can modify your Bartlett mic to be wireless-ready (for Shure wireless systems only). Cllick the link below for details.

**How do I make my Bartlett microphone wireless?**
Wireless-Ready Mic Modification

**How do I make my wireless Bartlett microphone hard-wired?**
As shown in the drawing of the wireless modification, a wireless-ready Mic has a short cable going to a TA4F connector, which plugs into the transmitter. If instead you want to plug in directly (hard-wired) to a mixer or preamp, you need a device that converts a TA4F to an XLR. The Shure RPM626 inline preamp does the job (shown below). Another choice is the Acacia Audio L1Z HW, for $59 here:https://www.sweetwater.com/store/detail/LizHWAdapter--acacia-liz-hw-adapter-for-shure-wireless-t4-to-xlr

**What mic should I use for a harp?**
What about cleaning my mic?Your microphone is a precision instrument. Keep it away from dust, pet fur, etc. If the mic needs cleaning, brush it gently with a clean, soft brush (such as a pastry brush or artist’s watercolor brush).

**What about cleaning my mic?**
When should I turn on phantom power, before or after I plug in the mic?Turn on phantom power AFTER plugging in the mic. Hot-plugging a mic into phantom power can, on rare occasions with old mic cables,, blow out the circuit in the mic. It's a good idea to use an on-off switch, and turn OFF the mic before plugging it in to a mixer with phantom power.

**When should I turn on phantom power, before or after I plug in the mic?**
Will the mics work with a loud rock band?Being omnidirectional mics, they will probably feed back when you turn them up loud enough to compete with electric instruments or drums. Our mics are designed for soloists, duos, or quieter acoustic groups such as old-time string bands, bluegrass bands, string quartets, and so on. The Cello Mic-LB (for loud bands) let you compete in volume with drums.Why do your mics have an omnidirectional pickup pattern?Omni mics generally have the best sound quality -- the most natural sound -- because they pick up all the parts of the instrument, rather than focusi

**Will the mics work with a loud rock band?**
My mic is dead or is making strange noises. (click here)

**Why do your mics have an omnidirectional pickup pattern?**
My mic is dead or is making strange noises. (click here)

**Where do you sell your microphones?**
We sell directly from this web site.Linksbanjohangout.com Forum on the banjo. Often hilarious!The Folk Alley A great folk-music site with streaming audio, community notes and news.http://www.therawfeed.com/stores/parts-express-com Coupons from Parts Express.http://www.andreasarnold.info/ This world-class flamenco guitarist endorses our Guitar Mic.www.johnmailander.com This awesome fiddle player recommends our Fiddle Mic.raynagellert.com One of the world's finest fiddle players endorses our Fiddle Mic.

**What is a stage-floor microphone?**
Does the venue have an influence on feedback?Yes. Our stage floor mics work great in theaters and auditoriums if the loudspeakers are placed close to the audience, Then feedback is not a problem. Some venues where feedback is likely to happen are:(1) Small venues such as nursing homes, night clubs, and music stores. Floor mics are not recommended for those venues.(2) Theaters with permanent loudspeakers that are close to or over the stage. They tend to cause feedback unless they are line arrays or column speakers. We recommend that you buy, borrow, or rent two portable PA speakers on stands, a

**Do your mics require phantom power?**
Yes, 12 to 48 volts. That is supplied by most mixers. The mic simply plugs into the mixer mic input to receive power. If your mixer does not have phantom power, you need to get a phantom power supply such as the ART Phantom I, Behringer PS400, or Rolls PB23. Plug the mic into the phantom supply, and connect the supply output to your mixer mic input.

**Do floor mics pick up a lot of footstep noise?**
It helps to brace the stage from underneath so that it doesn't creak. You might apply some sound damping material such as Fatmat eXtreme at www.fatmat.com. Also, switch in a 100 Hz highpass filter (lowcut filter) on each mic channel , 200 Hz for children.

**Can I reduce stage-floor thumps by putting the mic on a foam block or other padding?**
Can you recommend a powered mixer for use with your floor mics?One is the Peavey PVi 6500 for $399 from sweetwater.com. A complete sound system would be:

## Features
- Emergency service
- Live music

## Payment methods
- Visa
- Mastercard
- American Express
- Discover

## Languages
- English

## Social profiles
- Facebook: https://www.facebook.com/Bartlett-Audio-125350610825328/

---
Source: AI Find Me directory (https://aifindme.com/b/bartlett-audio). Facts were read from https://www.bartlettaudio.com/ and last checked 2026-11-22; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/bartlett-audio.json (it says where each fact comes from)
