# CobraFlex Printers

> CobraFlex Printers is a DTF and UV DTF printer manufacturer and supplier in Tempe, Arizona, offering ProFlex, King Cobra and Venom DTF printers, heat presses, DTF inks, film, powder, replacement parts and expert support.

- **Category:** Shops & Retail
- **Website:** https://cobraflexprinters.com/
- **Address:** 906 South Priest Dr, Unit 104, 85281 Tempe, AZ, United States
- **Country:** United States
- **Phone:** +1-602-930-1858
- **Email:** info@cobraflexprinters.com
- **Founded:** 2017
- **Web shop:** Web shop on Shopify: 652 products, $4.50–$1,296
- **Ships to:** United States
- **Shipping information:** https://cobraflexprinters.com/policies/shipping-policy
- **Returns information:** https://cobraflexprinters.com/policies/refund-policy
- **Order:** https://cobraflexprinters.com/collections/dtf-parts-supplies
- **Contact page:** https://cobraflexprinters.com/pages/contact-us

## About
Founded in 2017 by industry veterans Chris and Jim, CobraFlex Printers began with a bold vision — to create the next generation of industrial-grade Direct-to-Film (DTF) printers built specifically for the demands of high-volume production. With over six decades of combined experience in commercial printing, engineering, and business operations, Chris and Jim knew the industry needed a smarter, faster, and more reliable solution. We don’t retrofit small-format machines. We design true production-grade DTF printers from the ground up — machines that are purpose-built for reliability, speed, and scalability.

## What they sell
Sells: Best DTF Printers for Startups and High-Volume Shops, Equipment, UV DTF Printer Systems | Professional UV DTF Printing Machines, ProFlex 24" DTF Printer Spare Parts, ProFlex DTF 13" Mini Spare Parts, Consumables, ProFlex UV 13" DTF Printer Spare Parts, ProFlex UV 24" DTF Printer Spare Parts, V2 UV 13" DTF Printer Spare Parts, V2 UV 24" DTF Printer Spare Parts, V2 13" DTF Printer Spare Parts, King Cobra 63" DTF Printer Spare Parts, DTF-A60X DTF Printer Spare Parts, 63" Venom & King Cobra Shaker Dryer, DTF Meaning, CobraFlex 63inch 15-Head Venom DTF Printer Spare Parts, Parts & Supplies, ProFlex 24 Shaker Dryer Spare Parts, V2 24 Shaker Dryer Spare Parts, 24" FB Flatbed Cutter Spare Parts, ProFlex 24 Belt Shaker Dryer Spare Parts, ProFlex UV-FB (FlatBed) Printer Spare Parts, DTF Inks, DTF Printers & UV Printers, Ink, DTF Film, DTF Printer Packages, Film, Inks 10%Off, Inks 5%Off
Price range: $4.50–$1,296 (652 products, 12 shown here)

- DTF Printer Vacuum fan under platform: $60 (in stock) — https://cobraflexprinters.com/products/dtf-printer-vacuum-fan-under-platform
- DTF CobraFlex Film 23.62" x 328.08' (2-PACK): $300 (in stock) — https://cobraflexprinters.com/products/cobraflex-dtf-powder-transfer-film-24-hot-peel-2-pack
- Gen 1 Head Circuit Board: $1,296 (in stock) — https://cobraflexprinters.com/products/gen-1-head-circuit-board
- Vacuum pump: $350 (in stock) — https://cobraflexprinters.com/products/vacuum-pump-20
- Take-up Motor: $355 (in stock) — https://cobraflexprinters.com/products/take-up-motor-20
- Powder shaking motor: $225 (in stock) — https://cobraflexprinters.com/products/powder-shaking-motor-20
- Driving motor for mesh-belt- 9RPM 100W: $195 (in stock) — https://cobraflexprinters.com/products/driving-motor-for-mesh-belt-9rpm-100w-20
- 63" Shaker Dryer Powder Lifting & Auger Motor: $189 (in stock) — https://cobraflexprinters.com/products/powder-lifting-motor-180rpm-20
- Powder recyling/dusting motor- 18RPM: $189 (in stock) — https://cobraflexprinters.com/products/powder-recylingdusting-motor-18rpm-20
- Spring for shaft: $4.50 (in stock) — https://cobraflexprinters.com/products/spring-for-shaft-20
- Bearing F6904: $27.95 (in stock) — https://cobraflexprinters.com/products/bearing-f6904-20
- Bearing F6901: $27.95 (in stock) — https://cobraflexprinters.com/products/bearing-f6901-20

Products as published by the shop (read from the shop 2026-11-22; the shop last changed its products 2026-11-22; last change seen here 2026-11-22); prices and stock change.

## Opening hours
- Hours: Monday – Friday, 9:00 AM – 5:00 PM MST

## Services
- Equipment
- Inks
- Powder
- Film
- Heat Presses
- Parts & Supplies

## Prices
- Subtotal: $0.00
- Hourly Rate: $85.00 per hour

## Frequently asked questions

**Shop Our DTF Products**
DTF Equipment DTF Consumables DTF Heat Presses

**Educational**
FAQS Heat Pressing Powderless DTF (Coming Soon) Mastering Heat Pressing

**How do I place an order with CobraFlex Printers?**
You can order three ways: call (602) 930-1858 to order directly with a DTF specialist, email info@cobraflexprinters.com with your equipment list for a written quote, or purchase online through the CobraFlex store at https://cobraflexprinters.com. Phone orders are the fastest way to confirm stock, freight options, and current configurations on large-format equipment.

**What is the phone number for CobraFlex Printers?**
The CobraFlex Printers phone number is (602) 930-1858. This line connects you to the sales and support team at the company headquarters in Tempe, Arizona for orders, quotes, technical support, and demo scheduling.

**Where is CobraFlex Printers located?**
CobraFlex Printers, LLC is located at 906 S Priest Dr, Unit 104, Tempe, AZ 85281, near Phoenix Sky Harbor International Airport. The company ships DTF printers, UV DTF printers, inks, film, and consumables nationwide to all 50 states.

**Can I see a DTF printer in person before buying?**
Yes. CobraFlex offers live equipment demonstrations by appointment at its Tempe, Arizona facility. Call (602) 930-1858 to schedule, and the team will have the specific DTF or UV DTF printers you are considering running when you arrive. Customers are welcome to bring their own artwork and garments to test.

**Does CobraFlex provide technical support after purchase?**
Yes. Every printer CobraFlex sells is backed by hands-on onboarding and ongoing technical support from the in-house team. Existing customers can call (602) 930-1858 for live troubleshooting or email info@cobraflexprinters.com with photos and print samples for diagnosis.

**How fast does CobraFlex respond to emails?**
Emails sent to info@cobraflexprinters.com are answered within one business day, Monday through Friday. For time-sensitive needs such as production-down support or same-day order questions, calling (602) 930-1858 is the fastest option.

**What should I have ready when I call about buying a printer?**
It helps to know three things: what you print (apparel, hard goods, or both), your expected monthly volume, and your available workspace and power. With those answers, a CobraFlex specialist can recommend the right printer width, ink configuration, and curing setup in a single call.

**How To Heat Press CobraFlex Transfers No Powder-100% Polyester**
Pre-Press: Not Necessary STEP 1Press: 345 degrees | Firm-Medium pressure | 10-12 seconds Place the transfer on the warm pre-pressed garment and apply the DTF transfer. STEP 2Removing Transfer: Depending upon the type of film, Cool or Warm peel. When ready to remove the transfer film off the garment, peel at a 45-degree angle SLOW until completely off. STEP 3Post-Press: 345 degrees | Firm-Medium pressure | 5 secondsUse a Teflon sheet and cover the transfer then repress.

**How To Heat Press CobraFlex Transfers No Powder-Tri-Blends & 50/50**
STEP 1Pre-Press: 345 degrees | Firm-Medium pressure | 20 secondsThe Pre-Press step is very important to achieve the best adhesion. Pressing the garment first without the transfer will help extract moisture, silicone, and any other products out of the fabric.STEP 2Press: 345 degrees | Firm-Medium pressure | 20 secondsPlace the transfer on the warm pre-pressed garment and apply the DTF transfer. STEP 3Removing Transfer: Depending upon the type of film, Cool or Warm peel. When ready to remove the transfer film off the garment, peel at a 45-degree angle SLOW until completely off. STEP 4Post-Press:

**How To Heat Press CobraFlex Transfers No Powder- 100% Cotton**
STEP 1Pre-Press: 345 degrees | Firm pressure | 40 seconds The Pre-Press step is very important to achieve the best adhesion. Pressing the garment first without the transfer will help extract moisture, silicone, and any other products out of the fabric. STEP 2Press: 345 degrees | Firm pressure | 40 seconds Place the transfer on the warm pre-pressed garment and apply the DTF transfer. STEP 3Removing Transfer: Depending upon the type of film, Cool or Warm peel. When ready to remove the transfer film off the garment, peel at a 45-degree angle SLOW until completely off. STEP 4Post-Press: 345 degree

**Daily Printer Procedures and Maintenance V1 Printer**
Open the PDF from this link and save it to your PC.https://drive.google.com/file/d/1-tjg-TRUQ0k62fnD1tAREkH19hTFcC-B/view?usp=sharingIf you have an older model printer see this document below. Start-Up and End-of-Day Printer Procedures(and Non-Production Days)Discover the latest version of our daily printer maintenance sheet and how it can help you keep your printer in optimal conditionStart-UpLearn the essential steps to kickstart your printer's daily operation for peak performance. Check Ink Tank levels ink levels must be at least one inch above the lower spout Check material (film) level Ch

**How Do I Install the Inedit NeoStampa10 Software?**
This a brand new software that you can install a free 30 day trial for testing and use. In our testing of the software we are finding that this software works better with CMYK and RGB image compatibility modes and printing the right colors out. Unlike Flexi, this software has the ability to use direct CMYK and RGB values when printing, thus printing a more accurate and vibrant color match in most cases. Unlike the Flexi program where there is a color conversion, this software has no color conversion and true colors are printed with true RGB or CMYK values. We have had some success in better co

**Humidity : Tips in Getting Powder to Stick and Adhere Correctly**
Understanding the Role of Humidity in Direct-to-Film Printing1. Humidity in the room may be too high. We have had a few cases where the environment outsidecan cause the inks to not adhere all the way when humidity is 80 % or higher outside.We do recommend 40 % as the standard, however in some cases of extreme humidity, this can be lowered to 25-30 % to help alleviate the issue of glue not curing properly or excess powderonto film prints.What could be happening is that the moisture is being trapped in between the CMYK layer and the glue layer, which causes the powder glue to not stick to the in

**NeoStampa10 : Getting Started With the Program**
Here is a video that explains the features and how to setup your 1st layout and optionsstep by step.https://drive.google.com/file/d/1fAix1ey7uBfVCzJGeQsIAQ-vAtBZU8wl/view?usp=sharingIt covers the basics....1. Layout Setup of Artboard.2. White Layer Control3. Creating multiple images and nesting.4. Printing in CMYK versus RGB.5. Color Bar Printing6. Choke Settings

**The Impact of Humidity on Direct-to-Film Printing**
The Impact of Humidity on Direct-to-Film Printing: A Comprehensive Analysis of Film and Powder EffectsDirect-to-film printing has become a popular method for transferring images onto various surfaces, including textiles and ceramics. This innovative technique involves using a film positive to create stencils that guide the application of ink or powder onto the target surface. However, the environmental conditions, particularly humidity, can significantly influence the outcome of this process. In this informative article, we will delve into the effects of humidity on film and powder related to

**White Alignment for the Gen 2 Printer**
On the software under the Adjustment tab when looking at the Head Space Setting,VerticalYou will notice that there is a Print Adjust button. One adjustment only.Push the Print Adjust button.It should print a chart showing you what number needs to be added to the current number in the H2 box. Vertical Test : Head Space HorizontalYou will notice that there is a Left Print Adjust button and a Right Print Adjust button.You will need to do both sides.Push the left Print Adjust button 1st to do the left alignment 1st, once aligned, do the right side alignment next.Each one should print a chart showi

## Features
- Air conditioning

## Languages
- English

## Social profiles
- Instagram: https://www.instagram.com/cobraflexprinters/
- Facebook: https://www.facebook.com/cobraflexprinters/
- YouTube: https://www.youtube.com/@CobraFlexPrinters
- X: https://x.com/CobraFlex_
- Pinterest: https://www.pinterest.com/CobraFlexPrinters/
- TikTok: https://www.tiktok.com/@cobraflexprinters

---
Source: AI Find Me directory (https://aifindme.com/b/cobraflex-printers). Facts were read from https://cobraflexprinters.com/ and last checked 2026-11-22; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/cobraflex-printers.json (it says where each fact comes from)
