# DurabakStore

> Durabak Store Slip & Fall solutions for slip-resistant concrete floor/pools, Non-skid marine walkways, boat and traffic decks, Off-road vehicles/bike trailiers

- **Category:** Shops & Retail
- **Website:** https://www.durabakstore.com/
- **Country:** United States
- **Phone:** 360-573-1994
- **Email:** CustomerService@durabakstore.com
- **Web shop:** Web shop on Shopify: 10 products, $0.95–$37.95
- **Ships to:** Worldwide
- **Delivery:** 3 business days
- **Shipping information:** https://www.durabakstore.com/pages/shipping-to-alaska-canada-or-hawaii
- **Returns information:** https://www.durabakstore.com/pages/shipping-and-returns
- **Pricing:** https://www.durabakstore.com/pages/pricing-for-slip-and-fall-water-intrusion-and-substrate-seal-projects
- **Contact page:** https://www.durabakstore.com/pages/contact

## About
My love for Durabak products began in 1989 when I was a contractor working out of Prudhoe Bay, Alaska and I came upon the Durabak products. I began using them and realized that they were better than any other urethane product I had used before, and I wanted to share them with other people! Before I had come across this wonder-product, I used many other products that were similar to Durabak, but each one failed to meet my needs of durability, and cost effectiveness. I became a distributor in 1990 and later formed NewLineSafety, LLC and in 2004, set up the DurabakStore for the distribution of Cote-L Industries' Durabak line of products.

## What they sell
Sells: Durabak Accessories, Coatings For "DIY" or "Professional Applicators", Durabak 18, Zero VOC Indoor Coatings
Price range: $0.95–$37.95 (10 products)

- Durabak Fleece (20 Ft. Increments): $22.95 (in stock) — https://www.durabakstore.com/products/durabak-fleece
- Stipple Roller Sleeve: $1.95–$6.95 (in stock) — https://www.durabakstore.com/products/stipple-roller-sleeve
- Silicon Carbide w/ Shaker: $0.95–$1.95 (in stock) — https://www.durabakstore.com/products/silicon-carbide-w-shaker
- Metcote Primer: $25.95 (in stock) — https://www.durabakstore.com/products/metcote-primer
- DuraFlakes 1 oz/count: $0.95 (in stock) — https://www.durabakstore.com/products/duraflakes
- Ceasefire Polyurethane Additive: $4.95–$17.95 (in stock) — https://www.durabakstore.com/products/ceasefire-durabak-polyurethane-additive
- Durabak 18 M26 Marine Non-Slip Coating | DurabakStore: $37.95–$171.95 (in stock) — https://www.durabakstore.com/products/durabak-18-m26
- Durabak M26 Indoor non rusting fire protection materials available for US Navy projects (excludes rollers): $26.95–$114.95 (in stock) — https://www.durabakstore.com/products/durabak-m26
- Durabak Indoor Non Slip Safety Walking Surface (excludes rollers): $24.95–$103.95 (in stock) — https://www.durabakstore.com/products/durabak
- Durabak 18 Outdoor Non-Slip Coating | UV Protected | DurabakStore: $33.95–$138.95 (in stock) — https://www.durabakstore.com/products/durabak-18

Products as published by the shop (read from the shop 2026-11-21; the shop last changed its products 2026-11-21; last change seen here 2026-11-21); prices and stock change.

## Prices
- items in your cart: €0,00
- from: €33,95

## Frequently asked questions

**1. How do I prepare my surface for Durabak?**
Please see our Surface Prep Guide (.pdf)

**2. How do I test if my surface is ready for an application of Durabak?**
Always use the 2 inch patch test. When you think your substrate surface is ready to go: take a 2 inch throw away chip brush, and apply some 2 inch by 2 inch patches onto your prepared substrate. Look for any variations in color or texture of surface and put a patch in those areas. Use the first day to prep your substrate. Just before you go home, apply the patches. Let them sit for 8 to 10 hours at least. By then the Durabak is dried and is starting to cure-out, and is like a very stiff rubber band. Place a pocket knife blade under the Durabak on top of the substrate, and pull straight up. The

**3. How do I apply Durabak?**
Please see our Application Instructions (.pdf)

**4. What can I use to apply Durabak?**
Durabak can be applied with a spray gun, brush or roller. We recommend using Cote-L's stipple roller covers to apply the non slip Durabak if it is not to be sprayed on. A brush can always be used to apply the Durabak.

**5. Can I spray Durabak?**
You need a nozzle that will pass 10 mil rubber chips, and the o-rings of the gun must be able to sustain the use of xylene.

**6. How much coverage will I get with one gallon of Durabak?**
A gallon of Durabak non-slip will cover about 60 square feet, at 15 wet mils (using the recommended 2 coats). A gallon of smooth Durabak will cover 110 sq ft at 15 wet mils. As a hint, a 3/8 inch nap roller cage or the Cote-L stipple rollers will apply 12 to 15 wet mils naturally. A 3/16 inch lamb skin roller will apply 10 to 12 wet mils naturally. A quart of Durabak non-slip will cover 15 square feet at 15 wet mils. These numbers are subject to some variability due to external factors, such as the porosity of the surface.

**7. Can I 'get away' with applying only one coat of Durabak?**
Yes/ No. Durabak is a self leveling product. If the surface profile is greater than the wet mil coverage of the top of the surface profile, you run the risk of not sealing the surface of the substrate, and water getting into and under the Durabak material. This will cause the substrate surface to fail, and callusing Durabak material to peal bonded onto the substrate material that failed. The second coat is crucial to the long term durability of the product. It is responsible for creating a single membrane that strengthens the bond between the surface and the Durabak. The second item to conside

**8. Can I apply more than two coats of Durabak?**
Yes. While two coats is the recommended minimum, you will get even more durability with a third coat. In applications where extra thickness of the Durabak material is needed to sustain the abuse of the surface traffic such as car driving lanes, it is recommended that a third coat of Durabak at 15 wet mils be used and a silicon carbide powered be applied to the wet surface of the third coat of Durabak material.

**9. I have some Durabak left over. How should I reseal it?**
Durabak is a very strong polyurethane. After opening the can (and before use), place blue carpenter tape on the can rim. Before closing the can, pull off the carpenter tape, and clean the rim and can lid very well, or you will not get the can open again without peeling the lid off the can. Place 5 to 7 oz of xylene into the can. Then seal it. We advise storing Durabak with the lid closed very tightly and with the can upside down. If Durabak is stored with the lid up, the Durabak on the lid may cure, making it very difficult to open for its next use.

**12. How do I clean Durabak coated surfaces?**
The most successful removal of water-based dirt from the Durabak surface has been with Handy Andy, an ammonia-containing household cleaner and a nailbrush, while oil-based dirt was best removed with methylated spirits (meths) and a nailbrush. The surface can best be returned to almost original condition by first cleaning with Handy Andy and then Meths. For more, see our Care & Maintenance page.

**13. Who may I speak with for more technical assistance?**
Contact Us

**What is Durabak?**
2. Durabak 18 is renowned for its reliability and durability. Thousands of professionals stand by Durabak 18 as their choice coating for almost any job. Durabak 18 is a flexible, one-part, non-slip, UV & chemical protective, chemically cross-linked polyurethane coating with potentially unlimited uses. It will not crack, it will expand / contract for roof, deck coating, playground equipment, non-slip for fire truck, heavy equipment, stairs for egress & ingress safety grip & reduce slip & fall events. It is used for sealing up wood, metal, fiberglass, sheet rock from dry rot, mold, rust, corrosi

## Features
- Outdoor seating
- Free consultation

## Languages
- English

## Social profiles
- Facebook: http://www.facebook.com/durabak

---
Source: AI Find Me directory (https://aifindme.com/b/durabakstore). Facts were read from https://www.durabakstore.com/ and last checked 2026-11-21; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/durabakstore.json (it says where each fact comes from)
