# FORG3D

> Precision workholding and Systainer-ecosystem accessories. Designed and made in the USA.

- **Category:** Shops & Retail
- **Website:** https://forg3d.store/
- **Country:** United States
- **Email:** sales@forg3d.co
- **Web shop:** Web shop on Shopify: 72 products, $2.95–$274.95
- **Ships to:** Worldwide
- **Shipping information:** https://forg3d.store/policies/shipping-policy
- **Returns information:** https://forg3d.store/policies/refund-policy

## About
Start with a workholding system, or pick up where you left off in your cut list. A patent-pending vacuum anchor that keeps the surface clear and every setup repeatable. Colors that tell you what's inside, a case that's light for what it carries, generations that still latch together, and no single owner. Why we build on Systainer.

## What they sell
Sells: SYS-GRP Workholding, SYS-ORG Organizers, SYS-FIT Racks, Built for Mobile Workshops, Built for Passionate Makers, Built for Dash-board PWS, Built for Everyone, Built for Festool, Built for Finish Carpenters, Built for Furniture Makers, Built for Home Workshops, Built for Professional Contractors, Built for Systainer, Built for the Obsessives, FORG3D Launch Wave, FORG3D Edition, SYS-DTM Reference & Squaring, SYS-FIT Fitouts, SYS-MRC Merch, SYS-DST Extractor Accessories, SYS-MNT Mounts, SYS-RLZ Rail Slides, SYS-GRD Drawer Grids, SYS-SRF Work Surface, CNC Accessories, SYS-PLT Mounts
Price range: $2.95–$274.95 (72 products, 12 shown here)

- SYS-GRP Rail Inserts — M5: $11.95 (in stock) — https://forg3d.store/products/sys-grp-rail-inserts-m5
- SYS-DTM Corso Bench Dogs: $18.95–$23.95 (in stock) — https://forg3d.store/products/sys-dtm-corso-bench-dogs
- SYS-DTM Cardo 320 / 640 Kit: $144.95–$172.95 (in stock) — https://forg3d.store/products/sys-dtm-cardo-320-640-kit
- SYS-DTM Cardo Square — FORG3D Edition: $274.95 (in stock) — https://forg3d.store/products/sys-dtm-cardo-square-forg3d-edition
- SYS-GRP BenchGrip Akros — FORG3D Edition: $265.95 (in stock) — https://forg3d.store/products/sys-grp-bench-grip-akros-forg3d-edition
- SYS-RLZ Systainer³ S 76 Wall Bracket: $14.95 (in stock) — https://forg3d.store/products/systainer3-s-76-wall-bracket
- SYS-GRP FS Rail Manus — FORG3D Edition: $209.95 (in stock) — https://forg3d.store/products/sys-grp-fs-rail-forg3d-edition
- SYS-GRP PodSpacers: $22.95 (in stock) — https://forg3d.store/products/sys-grp-podspacer-kit
- SYS-SRF Extrusion Kit: $26.95 (in stock) — https://forg3d.store/products/sys-srf-extrusion-kit
- SYS-SRF Surface — Work Surface, Simplified: $79.95–$97.95 (in stock) — https://forg3d.store/products/sys-srf-surface-simplified
- SYS-GRP VAC Adapter Kit — VAC-SYS / VacuPress Integration: $55.95 (in stock) — https://forg3d.store/products/sys-grp-vac-adapter-kit-vac-sys-vacupress-integration
- » SYS-GRP Argos – Your Loyal Bench Driver (Discount): $18.95 (in stock) — https://forg3d.store/products/sys-grp-argos-loyal-bench-driver-sca_clone_freegift

Products as published by the shop (read from the shop 2026-11-22; the shop last changed its products 2026-11-22; last change seen here 2026-11-22); prices and stock change.

## Services
- Workholding inside the bench.
- Complete the system.
- Customer Reviews
- Build it further.
- SYS-GRP Hub — Control Your Workholding: Bench-edge valve routing and quick-release for SYS-GRP. Under-rail or front-face mounting with Wings. Three bundles — Core, Foundation, Prime — each expandable at any time with Solo through Quint Valve Panels. Valve bodies not included.
- SYS-GRP BenchGrip — FORG3D Edition: Three curated BenchGrip configurations for bench, rail, and heavy-panel workholding — each matched to a workflow priority and ready for work in the shop or on the go.
- SYS-GRP BenchGrip Minimus Vacuum Pods: Compact 90 mm vacuum pods for bench, extrusion, and custom fixture workholding. Single Port, Dual Port (chainable), and Offset Mount for adapting to other extrusion channel geometries — like Dash-Board PWS.

## Prices
- Subtotal: €0
- From: €35,95
- SYS-GRP AnchorPod — Precision-Engineered Workholding Solution: €35.95

## Frequently asked questions

**The System**
System overview Built forHome Workshops Passionate Makers The Obsessives Finish Carpenters Furniture Makers Mobile Workshops Professional Contractors NOW BUILDINGAnchorPod precision flow Explore the System

**Shop**
WorkholdingWork SurfaceReference & SquaringOrganizationTool RacksFitoutsAll ProductsAll SystemsCuratedFORG3D EditionFeaturedLaunches FORG3D EDITIONAnchorPod Launch Edition Shop the Edition

**Journal**
Why We Build on Systainer430 Miles to Newport — What We're Bringing to SplinterCon, and Why We GoHow to Set Up a Systainer for Track Saw WorkGifts for Festool and Systainer Owners: The 2026 FORG3D Gift GuideThings That Go Bump in the ShopSee AllAbout Us Our Origin Our Ethos Our Products LATESTWhy a vacuum anchor changes the bench Read more

**What vacuum source do I need to run SYS-GRP pods?**
A dedicated vacuum pump is required. For single pod setups, 0.7 to 1.0 CFM is a good minimum. More airflow improves consistency for multi-pod arrays.

**Can I use my Festool CT dust extractor as the vacuum source for SYS-GRP?**
No. Festool CT dust extractors do not generate the sustained vacuum level required for workholding. A dedicated vacuum pump is required.

**How many SYS-GRP pods can I run from a single vacuum source?**
It depends on your pump. Running 3 to 4 pods simultaneously is common with pumps delivering 3 or more CFM.

**Do SYS-GRP vacuum pods work with a Festool MFT workbench?**
Yes. SYS-GRP is compatible with any MFT-style workbench with 20mm or 3/4-inch dog holes using AnchorDogs. Multi-hole pods — Maximus, Magnus, and Harpyie — are spaced for the standard 96mm on-center dog hole pattern.

**What is the difference between Minimus, Maximus, Magnus, and Harpyie vacuum pods?**
Each pod is sized for different workholding scenarios. Minimus is the smallest at 90mm square, suited for small workholding, side-of-bench mounting, and panel balancing. Maximus offers approximately twice the surface area of Minimus for roughly double the holding force, in vertical or horizontal applications. Magnus is the largest pod with approximately twice the surface area of Maximus. Harpyie is designed for narrow stock applications.

**Do SYS-GRP pods work with Shaper Origin?**
Yes. The SYS-GRP Shaper Plate Vacuum Pods are purpose-built for the Shaper Origin routing plate.

**What is the difference between SYS-SRF Minor and Metris?**
Minor is 507mm x 396mm (2.6kg). Metris is 618mm x 396mm (3.2kg). On an M Series Systainer stack, Minor creates overhang on both sides for extrusion interfaces and vertical BenchGrip workholding. Metris on an M Series stack is the only SYS-SRF configuration that supports AnchorPod. On an L Series stack, Metris creates the same functional overhang that Minor creates on an M Series.

**What are the three SYS-SRF top configurations?**
Core includes 8 dogholes and extrusion interfaces on the outer edges. Foundation includes a full 20mm doghole grid at 96mm pitch — MFT-compatible — plus extrusion interfaces. Dock for TrackSaw includes 8 dogholes, extrusion interfaces, and a pocketed nest that gives the track saw body a fixed, repeatable landing position. All three configurations are available in both Minor and Metris.

**Does SYS-SRF work on a Systainer stack I already own?**
Yes. SYS-SRF mounts to standard M Series and L Series Systainer stacks. Older T-Loc stacks use the T-Loc Surface Cleats accessory.

**Can SYS-SRF be used without a Systainer?**
Yes. SYS-SRF works as a standalone work surface on any bench, cart, or flat support where you need it. It is designed to integrate with the Systainer ecosystem but is not limited to it.

**Is SYS-SRF compatible with vacuum workholding?**
Yes. BenchGrip horizontal workholding is compatible with all configurations. Vertical BenchGrip requires a configuration with extrusion interfaces and the Extrusion Kit installed. AnchorPod is compatible with Metris on M Series only.

**What is the SYS-SRF Extrusion Kit and do I need it?**
The Extrusion Kit installs aluminum extrusion profiles into the outer edge interfaces of the SYS-SRF panel. Once installed, SYS-PLT plates can attach and SYS-FIT racks can mount below the working surface. It is only needed if you want below-surface rack mounting or vertical BenchGrip workholding.

**What is in the SYS-DTM family?**
SYS-DTM is FORG3D's reference and squaring family: Cardo Square, the Cardo 320 / 640 reference bars, and Corso bench dogs. They register and square work. They do not hold work down against a cutter and do not replace a vacuum pod or clamp.

**What bench do I need?**
Any bench with 20mm dog holes on 96mm centers: SYS-SRF surfaces, Festool MFT and MFT-style tops. Corso dogs fit any 20mm dog hole.

**Cardo Square or Cardo 320 / 640?**
Cardo Square is a tool-free clamping square for glue-ups that becomes a bench datum afterward, registered to your dog grid. Cardo 320 / 640 is a reference bar you can position and angle anywhere on the bench through its slot, and a System 32 drilling guide when you add the blocks and the Corso Bore.

**Should I choose the Cardo 320 or the 640?**
Go by your drawer slides. The 320 reaches holes through 261mm from the panel edge, which covers slides up to about 18 in. The 640 reaches 453mm and beyond, which covers 21 in to 27 in slides and full-height cabinet sides.

**Do the pieces work together?**
Yes. The slot and dogs are shared across the family, so the same Corso dogs work with Cardo Square and the Cardo bars. Corso 16X ships in both Cardo kits and is long enough to pass through a Cardo body into the bench hole below.

## Features
- Gift cards

## Payment methods
- iDEAL

## Languages
- English

## Social profiles
- Instagram: https://www.instagram.com/forg3d.store/

---
Source: AI Find Me directory (https://aifindme.com/b/forg3d). Facts were read from https://forg3d.store/ and last checked 2026-11-22; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/forg3d.json (it says where each fact comes from)
