# lickmybutton.com

> Zelf je eigen buttons of magneten laten maken met bedrukking van jouw ontwerp?Bestel gemakkelijk online voor elk budget! Of zelf buttons maken met een stevige buttonmachine en onderdelensets. Kopen met 5 jaar garantie of huren voor je evenement, promotie of workshop?

- **Category:** Shops & Retail
- **Website:** https://www.lickmybutton.com/en
- **Address:** Fysiek adres: pahoehoe VOF, Waarloosveld (enkel admin), 19a, 2550 Kontich, België
- **Country:** Belgium
- **Phone:** +32476380105
- **Email:** info@lickmybutton.com
- **VAT number:** BE0881546490
- **Web shop:** Web shop on Shopify: 14 products, €7–€360
- **Ships to:** Worldwide (29 countries)
- **Delivery:** 30 days
- **Shipping information:** https://www.lickmybutton.com/en/policies/shipping-policy
- **Returns information:** https://www.lickmybutton.com/en/policies/shipping-policy
- **Contact page:** https://www.lickmybutton.com/en/pages/contact

## About
Here you will find all complete parts sets for buttons with a pin on the back, magnets, key rings, pocket mirrors and bottle openers With a sturdy button machine and a circle cutter you can start making all variants of buttons in the chosen size. Can you make magnets from thick playing cards? Short answer: yes, playing cards are #buttonable (but some tricks are needed).

## What they sell
Sells: button onderdelensets, buttons laten maken, buttonmachine kopen, Kledingmagneten
Price range: €7–€360 (14 products, 12 shown here)

- Onderhoudsmiddel voor je buttonmachine (Siliconenvet): €15 (in stock) — https://www.lickmybutton.com/products/onderhoudsmiddel-voor-je-buttonmachine-siliconenvet
- Cirkelsnijder: €145–€190 (in stock) — https://www.lickmybutton.com/products/cirkelsnijder
- Buttonmachine: €225–€335 (in stock) — https://www.lickmybutton.com/products/buttonmachine
- Tegenmagneet rond 17mm (per 25 stuks): €12 (in stock) — https://www.lickmybutton.com/products/tegenmagneet-rond-17mm
- mylar plastic folie: €30 (in stock) — https://www.lickmybutton.com/products/mylar-plastic-folie
- 44mm button onderdelensets: €27–€80 (in stock) — https://www.lickmybutton.com/products/44mm-button-onderdelensets
- 56mm button onderdelensets: €27–€94 (in stock) — https://www.lickmybutton.com/products/56mm-button-onderdelensets
- 75mm button onderdelensets: €38–€90 (in stock) — https://www.lickmybutton.com/products/75mm-button-onderdelensets
- 38mm button onderdelensets: €24–€79 (in stock) — https://www.lickmybutton.com/products/38mm-button-onderdelensets
- 32mm button onderdelensets: €22–€74 (in stock) — https://www.lickmybutton.com/products/32mm-button-onderdelensets
- 25mm button onderdelensets: €18–€70 (in stock) — https://www.lickmybutton.com/products/25mm-button-onderdelensets
- Buttonmachine + cirkelsnijder (bundel): €360–€499 (in stock) — https://www.lickmybutton.com/products/buttonmachine-cirkelsnijder

Products as published by the shop (read from the shop 2026-11-21; the shop last changed its products 2026-11-21; last change seen here 2026-11-21); prices and stock change.

## Services
- Buttonmachine
- Specifications / Sizes / Diameters
- With a Button Machine you can make all types of buttons: Buttons with a pin at the back; but magnets, key rings, pocket mirrors, bottle openers and flatbacks are also possible depending on which size button machine you choose.
- Design / print buttons
- Technical information about bleed and button size
- Button size: The button size is the size of your finished button. This is the image you actually see on the front of the button.
- Bleed or Bleed: The bleed is an extension of the button format. This ensures that there are no white edges on the buttons.
- Examples: The following examples clarify a lot:
- File formats: The following file formats can be supplied: .pdf, .eps, .ai, .psd, .jpg, ... Make sure that when you use images, they have a minimum resolution of 300dpi or higher. The images supplied do not always have to have the circular shape as you se
- Button machine manual
- * STEP 1: Construction of the front (mould 1): Here you place all the parts of the front:
- * STEP 2: Construction of the rear (mould 2): Here are all the parts for the back (see further: Structure variants) in.
- Tips: * Paper: use quality printer paper from 90 to 120g. Heavier paper is possible, but cutting and making buttons becomes heavier, the edges of the buttons also become somewhat rougher because more material is compressed in the same place.
- Circle cutter
- Button machine + circle cutter (bundle)

## Prices
- Buttonmachine: €225
- Circle cutter: €145
- Button machine + circle cutter (bundle): €360

## Frequently asked questions

**Buy a button machine**
Buy a button machine buttonmachines circle cutter bundle - button machine & circle cutter 2nd hand - bargains

**Button parts kits**
Button parts kits 25mm 32mm 38mm 44mm 56mm 75mm mylar plastic folie Clothing magnets

**Extra services**
Extra services Repair maintenance

**Mylar Foil is not tight around the buttons or buttons are coming loose?**
*What?* If the foil does not fit tightly around the edge of the buttons, this is often due to one of the causes below. Mylar foil and paper must be able to move very smoothly in the molds. Otherwise they will rub too much against each other air bubbles on the edge of the buttons to arise. In extreme cases, the foil even hangs loose or comes off button apart.

**Specifications / Sizes / Diameters**
Before purchasing parts, check whether the original diameter of the Mylar foil is suitable for your device: Button size Diameter Mylar Folie 25mm 33,5mm 32mm 41,5mm 38mm 46,5mm 44mm 53,0mm 56mm 66,5mm 75mm 88,0mm

**Design / print buttons**
Technical information about bleed and button size When you design a button or send an image, you take 2 dimensions into account: "button size" & "bleed". Button size The button size is the size of your finished button. This is the image you actually see on the front of the button. Bleed or Bleed The bleed is an extension of the button format. This ensures that there are no white edges on the buttons. The following illustration will clarify a lot: The ending is different for all button formats: button 25mm + bleed: total diameter 33,5mm button 32mm + bleed: total diameter 41,5mm button 38mm + b

**Button machine manual**
How to make buttons? * Already made prints (papers)? Then you can continue with the manual below: With these devices you can make all types of buttons in 2 presses. To start, raise the red lever. This way the base with the bottom 2 molds (1,2) can be turn. Please note: With a newly greased appliance, this base may be somewhat stuck to the base plate. Then grab the mold and pull it upwards very evenly. The base then comes loose from the base plate a little later. * STEP 1: Construction of the front (mould 1) Here you place all the parts of the front: Convex can front (with the sharp side down,

**Extra cool edges for your buttons?**
To get extra cool edges and avoid air bubbles, you can limit the printing to the area where your paper disappears into the inside of the buttons.

## Payment methods
- PayPal
- iDEAL
- Sofort

## Languages
- English
- Dutch
- French
- German
- Italian
- Polish

## Social profiles
- Facebook: https://www.facebook.com/mybutton.shop
- Instagram: https://www.instagram.com/lickmybutton/
- Pinterest: https://www.pinterest.com/lickmybutton/

---
Source: AI Find Me directory (https://aifindme.com/b/lickmybutton-com). Facts were read from https://www.lickmybutton.com/en and last checked 2026-11-21; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/lickmybutton-com.json (it says where each fact comes from)
