# PermaClone

> Long-lasting, easy-to-sterilize, microwavable cloning collars in sizes for the top cloning systems: EZ-Clone®, TurboKlone®, Botanicare® Power Cloner®, OxyClone®, Clone King®, PsyCloner®, & DIY systems. Switch Now!

- **Category:** Shops & Retail
- **Website:** https://www.permaclone.com/
- **Country:** United States
- **Email:** Info@permaclone.com
- **Web shop:** Web shop on Shopify: 6 products, $3–$50
- **Ships to:** Worldwide (55 countries)
- **Shipping information:** https://www.permaclone.com/policies/shipping-policy
- **Returns information:** https://www.permaclone.com/policies/refund-policy
- **Contact page:** https://www.permaclone.com/pages/contact

## About
PermaClone® began as a problem-solving experiment. In 2012, biochemist and engineer Michael Goldsmith set out to tackle the frustration experienced by hydroponic and aeroponic growers: constantly replacing cheap, disposable propagation collars that harbor pathogens and cannot be properly sanitized. Goldsmith's solution was to design a collar that could be sterilized and reused while remaining food-grade and environmentally responsible. By carefully selecting molecular bonds that resist oxidation, heat, and ultraviolet light and minimizing petrochemical content, he developed a polymer blend that exceeds food-grade standards.

## What they sell
Sells: Cloning Collars, PermaClone Accessories
Price range: $3–$50 (6 products)

- Reusable Dunk-Base Bags for Easy Collar Cleaning & Sanitizing: $20 (in stock) — https://www.permaclone.com/products/dunk-base-bags
- PermaClone® 88mm Plant Collar (3.5" x 3.75", 88mm): $13 (in stock) — https://www.permaclone.com/products/permaclone-3-5-plant-collars
- 1/4-inch PermaFlow™ Sterilizable Hydroponic Tubing - Heat & Chemical Sterilizable, 50ft: $50 (in stock) — https://www.permaclone.com/products/permaflowtm-tubing
- PermaClone® 41mm Cloning Collars Fit the Botanicare® Power Cloner® systems AND the Clone King's®: $3 (in stock) — https://www.permaclone.com/products/permaclone-41mm-1-65in-fits-leading-cloning-systems
- PermaClone® 46mm Cloning Collars Fits TurboKlone®, OxyClone®, Clone King® and many 2" net pots: $3 (in stock) — https://www.permaclone.com/products/permaclone-46mm-1-75in-fits-leading-cloning-systems
- PermaClone® 48mm Cloning Collars Fits EZ-Clone®, Current Culture HPA, PsyCloner®, and AquaClone™: $3 (in stock) — https://www.permaclone.com/products/permaclone-48mm-1-9in-fits-leading-cloning-systems

Products as published by the shop (read from the shop 2026-11-22; the shop last changed its products 2026-11-22; last change seen here 2026-11-22); prices and stock change.

## Prices
- The highest price is: $50.00
- PermaClone® 48mm Cloning Collars Fits EZ-Clone®, Current Culture HPA, PsyCloner®: $3

## Frequently asked questions

**Q: How do I sterilize my collars?**
Q: How do I microwave sterilize my collars?Place 6–180 collars in a loosely closed, microwave-safe container (turkey bags work great) with approximately 1 cup of water. Microwave at 900–1,000 watts for 15 minutes.

**Q: How do I microwave sterilize my collars?**
Q: How do I pressure cook my collars?Following your pressure cooker’s safety guidelines, cook collars for 20–30 minutes at 15 psi. Start the timer once full pressure is reached. Allow pressure to drop slowly and naturally. DO NOT rapidly cool or release pressure while sterilizing.

**Q: How do I pressure cook my collars?**
Q: How do I sterilize my collars in the oven?Bake at 300°F (150°C) for 2 hours. Do not exceed 300°F. While the polymer handles higher temperatures, the food-grade dyes may slightly darken.

**Q: How do I sterilize my collars in the oven?**
Q: What settings do I use for autoclave sterilization?Following your autoclave’s safety guidelines, sterilize for 20 minutes at 15 psi and 121°C.

**Q: What settings do I use for autoclave sterilization?**
Q: Can roots grow into or through PermaClone® collars?No. PermaClone® collars are molded with a non-porous surface that resists root penetration, unlike traditional foam or neoprene collars.

**Q: Can roots grow into or through PermaClone® collars?**
Q: Do you ship internationally?Yes, and we ship at half the cost of standard international shipping rates for all order sizes. Our tariff codes are also structured so that many territories experience low or no tariffs.

**Q: Do you ship internationally?**
Q: How long do the collars last?We offer a 5-year warranty, but our polymer blend has been shown to last over 10 years under conditions far harsher than aeroponic cloning. We promise 5 years of productivity, or we’ll replace them free of charge.

**Q: How long do the collars last?**
Q: Can I chemically sterilize PermaClone® collars?Absolutely. PermaClone®’s polymer blend and central gap allow safe, effective chemical sterilization with a simple soak in bleach, peroxide, hypochlorous acid, Physan 20, Zerotol, and similar oxidizers. The central gap gives your solution immediate access to all surfaces, so there’s no need to pry open each collar individually. Note: traditional neoprene collars degrade quickly with these same agents.

**Q: Can I chemically sterilize PermaClone® collars?**
Q: What settings do I use at high altitudes?Altitude affects boiling points, not temperatures, so oven sterilization at 300°F is 300°F anywhere. For pressure cookers and autoclaves, the pressure valve maintains the conditions needed to reach 250°F (121°C) regardless of elevation.

**Q: What settings do I use at high altitudes?**
Q: My cuttings wilt right after placement. What should I do?A few things to check: 1) For aeroponic cloners, run the sprayer pump continuously (no cycle timing) for the first 24 hours. 2) Add silicate additives to your mother plant nutrients at medium-to-full strength before taking cuttings. 3) Mist cuttings immediately after taking them with water plus a plant-safe dose of your preferred oxidizer (hypochlorous acid, peroxide, or peroxyacetic acid). Most product lines publish foliar-safe dosages.

**Availability**
0 selected Reset Availability In stock (6) In stock (6 products) Out of stock (0) Out of stock (0 products)

**Price**
The highest price is $50.00 Reset $ From $ To

**Filter and sort Filter**
Filter and sort Filter 6 products Availability Availability In stock (6) In stock (6 products) Out of stock (0) Out of stock (0 products) Clear Apply Price Price The highest price is $50.00 $ From $ To Clear Apply Sort by: Featured Most relevant Best selling Alphabetically, A-Z Alphabetically, Z-A Price, low to high Price, high to low Date, old to new Date, new to old Remove all Apply

**Share**
Link Close share Copy link

## Languages
- English

---
Source: AI Find Me directory (https://aifindme.com/b/permaclone). Facts were read from https://www.permaclone.com/ and last checked 2026-11-22; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/permaclone.json (it says where each fact comes from)
