# Timberplates

> Steel truss plates, tie rods, and connectors for timber frames, laser-cut and built to order in Santa Anna, Texas.

- **Category:** Shops & Retail
- **Website:** https://www.timberplates.com/
- **Address:** 1600 Wallis Ave, 76878 Santa Anna, TX, United States
- **Country:** United States
- **Phone:** +1-325-400-1274
- **Email:** orders@timberplates.com
- **Founded:** 2011
- **Web shop:** Web shop on Shopify: 97 products, $2–$378
- **Ships to:** United States, Canada
- **Shipping information:** https://www.timberplates.com/policies/shipping-policy
- **Returns information:** https://www.timberplates.com/policies/refund-policy
- **Reviews:** Trustpilot: https://www.trustpilot.com/review/timberplates.com
- **Trust marks:** Trustpilot
- **Contact page:** https://www.timberplates.com/pages/contact-us

## About
It’s on your order confirmation, like #1234. We’ll email the order’s status link to the address on the order. Timberplates is a small, family-owned shop in Santa Anna, in the heart of Central Texas. Since 2011 we’ve built heavy steel plates and connectors to order for timber frame builders, architects, and homeowners. Today we cut, weld, thread, and powder coat in house, and our fiber laser gives every plate clean edges and bolt-ready holes. In 2008, my wife and I moved back to my hometown of Santa Anna to raise our three kids. In 2010, we built a home on family land. Its exposed trusses and vaulted wood ceiling are pictured on our home page.

## What they sell
Sells: Custom Plates, Heavy Duty Timber Angle Brackets, The Massif Collection of Timber Truss Plates (for 6"-10" Timbers), The Taiga Collection of Timber Truss Plates (for 4"-8" Timbers), The Cornice Collection of Timber Truss Plates (for 3"-6" Timbers), The Cuesta Collection of Timber Truss Plates (for 4"-8" Timbers), The Esker Collection of Timber Truss Plates (for 6"-10" Timbers), The Sierra Collection of Timber Truss Plates (for 8"-12" Timbers), Post Caps & Post Bases, Tie Rods, Heavy Duty Joist Hangers
Price range: $2–$378 (97 products, 12 shown here)

- Custom Queen Post Plate: $20–$22 (in stock) — https://www.timberplates.com/products/custom-queen-post-plate
- Custom Heel Post Plate: $20 (in stock) — https://www.timberplates.com/products/custom-heel-post-plate
- Knife Plate Post Base: $199 (in stock) — https://www.timberplates.com/products/concealed-post-base
- Custom Plate Washer: $2–$3 (in stock) — https://www.timberplates.com/products/custom-plate-washer
- Custom Peak Plate: $20 (in stock) — https://www.timberplates.com/products/custom-peak-plate
- Custom King Post Plate: $20 (in stock) — https://www.timberplates.com/products/custom-king-post-plate
- Custom Strut Plate: $20 (in stock) — https://www.timberplates.com/products/custom-strut-plate
- Custom Collar Tie Plate: $20 (in stock) — https://www.timberplates.com/products/custom-collar-tie-plate
- Custom Heel Plate: $20 (in stock) — https://www.timberplates.com/products/custom-heel-plate
- Custom Strut Fan Plate: $20–$26 (in stock) — https://www.timberplates.com/products/custom-strut-fan-plate
- Custom Fan Plate: $20–$33 (in stock) — https://www.timberplates.com/products/custom-fan-plate
- Custom Splice Plate: $20 (in stock) — https://www.timberplates.com/products/custom-splice-plate

Products as published by the shop (read from the shop 2026-11-17; the shop last changed its products 2026-11-17; last change seen here 2026-11-17); prices and stock change.

## Services
- Tie rod system questions
- The three systems

## Prices
- to your timbers: From $20
- From: $20
- Design Your Tie Rod System: $60

## Frequently asked questions

**Call, request a quote, or check an order**
Talk to the shop Call (325) 400-1274 Quotes Request a quote Orders View order status Website Order number Email my status link It’s on your order confirmation, like #1234. We’ll email the order’s status link to the address on the order.

**View order status**
Website Order number Email my status link It’s on your order confirmation, like #1234. We’ll email the order’s status link to the address on the order.

**Menu**
Tie rodsPlatesBracketsCustomizationDecorative truss guideAboutProjectsContact

**What is the lead time on orders?**
The lead time is displayed in red at the top of the Cart with at least one item in it. That is the best way to see the most up-to-date times. In general, powder coating and welding will add additional time to the standard lead time listed. Lead time is measured from the order placed to when it is shipped from our shop. We unfortunately have no control over independent carrier shipping times. You will get a tracking number as soon as your order is shipped.

**What is the status of my order?**
Type your order number into our order status lookup, and we’ll email the link to your order’s status page to the address on the order: every item, and each step it goes through in our shop. Once your order has shipped, use the tracking information we sent. Or call us at (325) 400-1274, and we’ll look it up.

**Do you do custom orders?**
Yes! We love designing the perfect item for our customers' unique needs. We don't charge for design; you pay only for the steel and welding. Use our quote form for a customized quote. Please be sure to include:Your namePhone numberAny designs or drawings you haveSteel thicknessWhether you would like powder coatingThe shipping addressWe can take it from there.

**Do you ship to Canada?**
We ship to Canada, but customs fees and tariffs are added to the order cost. Contact us for a complete quote.

**What do I do if my order is delivered incomplete or damaged?**
We sometimes ship orders in multiple boxes. You will receive a tracking number for each box. Even though we ship all the boxes at the same time, they don’t always show up on the same day. Please verify the tracking information for each box.Unfortunately, there are times when orders do get lost or damaged during shipping. Please contact us with the tracking number, and we will assist you in resolving the issue. If there is damage, pictures of the damage and as much detail as you can provide will help us when we are filing a claim with the shipping company on your behalf.

**Which collection should I use?**
In general, the timber width determines the collection you choose. We usually recommend leaving a wood "reveal" around the plates rather than having the plates go right to the edge of the wood. Also, please be aware that “dimensional lumber” is specified in nominal dimensions. For example, a 4 x 4 dimensional lumber post like you would buy at a big box store is actually 3 ½” x 3 ½”, so our 4” wide Taiga plates would actually extend past the edge of the lumber. Rough-sawn lumber is typically specified in actual dimensions, so a rough-sawn 8x8 will be roughly 8" by 8".If in doubt, call us, and w

**What steel thickness should I choose?**
3/16" is our standard thickness and suits most decorative work. 1/4" is heavier and stiffer. Our plates are architectural hardware, not engineered or load-rated: if a plate is part of how your structure carries load, have your engineer confirm the plate, its thickness, and its bolts. You and your engineer are responsible for its suitability.Need another thickness? Please contact us for additional options.

**What size are the bolt holes?**
The standard hole size of our plates is 11/16” unless otherwise noted. These holes are designed for 5/8" bolts. Our awning and face-mounted brackets default to 1/4" fasteners. If you would like to use a fastener of a different diameter, please contact us. We can usually make that change for free, and our online configurators let you choose the hole size for your fastener.

**What grade of steel do you use?**
We use industry-standard A36 plate and 1018 cold-rolled rod. Tie rod assemblies, brackets included, are also available in 316 stainless steel by quote. If you need a custom grade of steel, please call for a quote.

**What finishing options are available?**
Unfinished (included) - Mild steel rusts, so expect some superficial rust on your plates. In most cases, you can ignore it and apply your finish right over it, but if you really want, take some steel wool or sandpaper to it and wipe it off.Powder coat (additional cost) - Our matte black powder coat is gorgeous and one of the most durable finishes on the market. This is the preferred option for outdoor applications because of its UV stability. Matte black powder coating can be selected at checkout. Contact us if you need a different color.Galvanized - For outdoor installations in very wet envir

**Do you offer galvanizing?**
Yes! We do offer galvanizing. Please give us a call, and we can give you a quote. Please note that galvanizing adds substantially to lead times. Please plan accordingly.

**How do I add powder coating to an order?**
The powder coating option will appear above your cart during the checkout process.Click the checkbox, and the cost will be added to your cart. It might take a second or two to refresh the screen. To remove powder coating, uncheck the box.

**Can I return my order?**
Our plates are cut to order, and shipping of heavy steel plates is expensive. As such, we are regrettably not able to accept returns. Please review your order carefully before you place it. If you are even remotely unsure, consider making mockups out of cardboard or typing paper. All of our plates have detailed images that you can zoom in on and get accurate dimensions.If all else fails, call us, and we can help you pick the right plates. We love helping customers on their projects.

**What is your refund policy?**
You can view our refund policy here.

**What kinds of tie rod systems can I design?**
Three kinds. Awning / canopy systems hold up an awning or canopy from the wall above it. Walls & columns systems have both ends on vertical faces: walls, columns, or posts. Vaulted ceiling systems end on the rafters or pitched ceilings: a 2-point rafter tie is one level rod with an optional turnbuckle, and 3- to 5-point systems add vertical and diagonal rods meeting at a steel center plate.

**What rod sizes are available?**
Steel tie rods in 1/2", 3/4" and 1" diameters, each up to 20 feet long. A run with a turnbuckle joins two rods, so it can span farther. The wizard works out every rod length from your measurements.

**How do the rods attach?**
Either with a clevis and pin to a steel bracket, or through the timber, held by an ogee washer and heavy hex nut. We make round, square and rectangular face-mount brackets, pitched brackets for rafters and beams, and diagonal brackets for vaulted ceilings. You can also use your own brackets and tell us where their pins are.

## Features
- Family owned

## Languages
- English

## Social profiles
- Facebook: https://www.facebook.com/timberplates
- Instagram: https://www.instagram.com/timberplates/
- Pinterest: https://www.pinterest.com/timberplatescom/

---
Source: AI Find Me directory (https://aifindme.com/b/timberplates). Facts were read from https://www.timberplates.com/ and last checked 2026-11-17; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/timberplates.json (it says where each fact comes from)
