# Trask Performance

> Trask's online store carries a variety of performance parts for Harley-Davidson, Indian, and Victory Motorcycles

- **Category:** Shops & Retail
- **Website:** https://traskperformance.com/
- **Address:** 23045 N 15th Ave
- **Country:** United States
- **Phone:** 623.879.8488
- **Email:** info@traskperformance.com
- **Web shop:** Web shop on Shopify: 228 products, $1–$55,000
- **Ships to:** Worldwide
- **Shipping information:** https://traskperformance.com/pages/shipping-return-policy
- **Returns information:** https://traskperformance.com/pages/shipping-return-policy
- **Order:** https://traskperformance.com/collections/all
- **Contact page:** https://traskperformance.com/pages/contact

## About
Trask HQ in Phoenix brings everything under one roof. Manufacturing. R&D. Customer support. One operation, one standard, one focus. Every part is designed, built, and supported here. That means tighter control, consistent execution, and real accountability in every step. Founded by motorcycle expert Nick Trask, the mission hasn’t changed. Build Harley-Davidson® performance parts that are engineered, tested, and proven in real conditions.

## What they sell
Sells: All Trask Products, Replacement Parts, Frame & Controls, Turbo Accessories, As Seen in Hot Bike Volume 3, Exhaust, Fuel and Air, Engine and Driveline, Apparel, Touring Exhausts, Bitchin' Bolts, Turbo Systems, Softail Exhausts, Indian & Victory Exhausts, Dyna Exhausts, FXR Exhausts, Sportster Exhausts, V-Rod Exhausts
Price range: $1–$55,000 (228 products, 12 shown here)

- Trask Billet Aluminum Swingarm Kit - 25+ Softail (Gen 2): $2,999.95 (in stock) — https://traskperformance.com/products/gen-2-billet-aluminum-swingarm-2025-softail
- Trask Big Power Replacement Rain Sock: $15.95 (in stock) — https://traskperformance.com/products/big-power-replacement-rain-sock
- WORLD FAMOUS BLACK HOODIE: $59.95 (in stock) — https://traskperformance.com/products/world-famous-black-hoodie
- WANNA GO FAST BLACK HOODIE: $59.95 (in stock) — https://traskperformance.com/products/wanna-go-fast-black-hoodie
- Trask Billet Tail Section - Gen 2 M8: $3,499.95 (in stock) — https://traskperformance.com/products/trask-billet-tail-section-gen-2
- Trask Recon Fairing Support (Gen 2 Road Glide): $449.95 (in stock) — https://traskperformance.com/products/hidden-fairing-bracket
- Trask Recon VVT Timing Cover - Gen 2 M8: $119.95 (in stock) — https://traskperformance.com/products/billet-vvt-cam-cover
- Trask Big Papi Replacement Air Filter: $49.95 (in stock) — https://traskperformance.com/products/big-papi-replacement-air-filter
- Trask Assault Engine Guard - Gen 2: $449.95 (in stock) — https://traskperformance.com/products/assault-series-engine-guard-gen-2-m8-fl
- 86 Glide T-Shirt: $30–$35 (in stock) — https://traskperformance.com/products/86-glide-t-shirt
- Assault Glide T-Shirt: $30–$40 (in stock) — https://traskperformance.com/products/assault-glide-t-shirt
- Down Under Performance Head Pipe: $549.95 (in stock) — https://traskperformance.com/products/trask-performance-down-under-exhaust-system

Products as published by the shop (read from the shop 2026-11-17; the shop last changed its products 2026-11-17; last change seen here 2026-11-17); prices and stock change.

## Opening hours
- Mon - Fri, 7am - 4pm

## Services
- Get School'd
- Speed Shop

## Prices
- Regular Price: $149.95
- Sale Price: $149.95

## Frequently asked questions

**Where does my Trask 2 Bar Map Sensor Plug into?**
Do I need to do anything to my clutch?Our turbo systems are supplied with a heavy-duty Barnett clutch spring. It is the the only necessary modification needed when installing a low-power turbo kit. With a high-boost system, however, will require modifications. If unsure, please contact us, and we will be happy to help.

**Do I need to do anything to my clutch?**
Why is my bike smoking out of the tailpipe?Be sure to check the drain-back oil line from the turbo, into the engine. If that line gets restricted for any reason, this will allow too much oil to collect in the turbo and will pass by the seal, where it will escape as smoke. Another cause of this issue is an overfilled crankcase. If the crankcase is overfilled, it will allow oil to be circulated into the breather of the plenum, then collect in the air filter. When enough oil collects in the air filter, it will be sucked through by the turbo and thus cause the engine to burn oil, producing smoke.

**Why is my bike smoking out of the tailpipe?**
Why is my turbo system no longer producing significant boost?Be sure to check and clean the air filter, a clogged air filter will not supply enough air flow to the turbo. Another issue is lack of exhaust flow, be sure to check the exhaust for obstructions. If both of these have been examined and fixed, but there is still an issue; please contact us ASAP, as the issue may be more serious.

**Why is there large amounts of oil accumulating in my air filter?**
While oil accumulation in the air filter is normal for a Harley-Davidson engine, if there is a profuse amount oil in the filter -almost to the point where it may drip out- an issue is present. Be sure to check the drain-back oil line from the turbo back into the engine. If this line is restricted, too much oil will collect in the turbo and cause leakages. If an engine is turned off with this problem, the oil built up in the turbo will run out into the filter and cause leakage.

**With the turbo installed, I hear a clicking or tapping noise at idle, has something happened?**
Does my bike need a different type of oil now that it has a turbo installed?Fortunately, you can continue to run the 20w 50 full synthetic oil you have always used. This oil is optimal for both the engine and the turbo. To keep top performance, be sure to change the oil every 2000 to 2500 miles. Make sure not to overfill.

**Does my bike need a different type of oil now that it has a turbo installed?**
I would like to run my bike at the track, do I need to do anything?Running your bike at the track can be a great time, if your bike is well prepared. We highly recommend running at least 100 octane racing fuel. Other than that, that is all you will need to enjoy your bike at the track!

**I’d like to increase my boost a little for the track, how can I do that?**
If you want to increase your boost, it will need to be done mechanically on the actuator itself, or you can purchase a boost controller. Please give us a call so we can walk you through this process.

**Should I have my bike Dyno Tuned?**
I was told to let my bike idle after running it, do I really need to do this?Yes. After riding your turbo bike, do not shut off the engine right away, let the engine idle for about 20 seconds or so. This will allow for the oil to cool the turbo thoroughly, resulting in a longer life for your turbo.

**I was told to let my bike idle after running it, do I really need to do this?**
Where does my Trask 2 Bar Map Sensor Plug into?The Factory V-Rod map sensor is located between the cylinders next to the throttle bodies. Your Trask 2 bar map sensor will plug into the factory wiring harness plug. This will eliminate the usage of the factory map sensor. Leave the factory map sensor installed to keep the hole plugged.

**Why does my bike idle rough after the turbo install?**
Why is my bike smoking out of the tailpipe?Be sure to check the drain-back oil line from the turbo, into the engine. If that line gets restricted for any reason, this will allow too much oil to collect in the turbo and will pass by the seal, where it will escape as smoke. Another cause of this issue is an overfilled crankcase. If the crankcase is overfilled, it will allow oil to be circulated into the breather of the plenum, then collect in the air filter. When enough oil collects in the air filter, it will be sucked through by the turbo and thus cause the engine to burn oil, producing smoke.

**Why is my air filter hitting my radiator shroud?**
With the turbo installed, I hear a clicking or tapping noise at idle, has something happened?No, not at all. The noise that you are hearing is simply just the Blow-Off Valve pulsing with the strokes of the engine. This is normal operation.

**I am getting what looks like a small rust streak down the turbo cartridge, what is this?**
Do I need to change or what kind of oil do I need to run in my bike now that it has a turbo on it?This is simply condensation forming on the oil feed fitting and oil feed line dripping on the center section of the turbo. This is due to the temperature and pressure differences that occur in that part of the system. The center sections are coated with heat-resistant paint to solve this problem. For touch ups, we recommend VHT 2000º flat black paint.

**Do I need to change or what kind of oil do I need to run in my bike now that it has a turbo on it?**
I would like to run my bike at the track, do I need to do anything?Running your bike at the track can be a great time, if your bike is well prepared. We highly recommend running at least 100 octane racing fuel. Other than that, that is all you will need to enjoy your bike at the track!

## Payment methods
- Shop Pay

## Languages
- English

## Social profiles
- Facebook: https://www.facebook.com/traskperformance
- Instagram: https://www.instagram.com/traskperformance/
- YouTube: https://www.youtube.com/@TraskPerformance/featured

---
Source: AI Find Me directory (https://aifindme.com/b/trask-performance). Facts were read from https://traskperformance.com/ and last checked 2026-11-17; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/trask-performance.json (it says where each fact comes from)
