# Wheels Mfg

> We make high-quality bicycle bottom brackets, derailleur hangers, small parts, repair parts & tools.

- **Category:** Shops & Retail
- **Website:** https://wheelsmfg.com/
- **Address:** 1475 ArthurAve #1, 80027 Louisville, CO, United States
- **Country:** United States
- **Phone:** 303-410-7336
- **Email:** info@wheelsmfg.com
- **Web shop:** Web shop on Shopify: 1,362 products, $5.95–$106.95
- **Ships to:** Worldwide (50 countries)
- **Shipping information:** https://wheelsmfg.com/policies/shipping-policy
- **Returns information:** https://wheelsmfg.com/pages/warranty
- **Order:** https://wheelsmfg.com/pages/wheels-mfg-hootin-hauler-starter-kit
- **Contact page:** https://wheelsmfg.com/pages/contact

## About
Welcome to Wheels Manufacturing, one of the world's largest suppliers of high-quality bicycle derailleur hangers, small parts, repair parts, and specialty tools. We started in 1988 in Boulder, Colorado as a small machine shop producing cog removal tools and chain ring spacers, and quickly grew into a large-scale manufacturing facility producing a full line of small parts totaling over 1000 products. We are now located in Louisville, Colorado, about 10 miles from our original location. At Wheels Manufacturing we strive to meet the demands of today's cyclists and service centers.

## What they sell
Sells: All Derailleur Hangers, 1 Fastener, 2 Fastener, Bearing Presses, Bearing Press Adapters, Bearing Press Parts, Bearings, Bearing Extractors, 3 Fastener, Axles, BB86/92, BB Bearing Extractors, BB / Crank Adapters, BBRight™, Ball Bearing Retainers, 386EVO, Ari (formerly Fezzari), Avanti, Axle Spacers, BB30 Outboard, Bells for the Trail, BB30 Adapters, Access, Airborne, All-City, Azonic, Barracuda, BB86/92 for 30mm, 4 Fastener, Airnimal
Price range: $5.95–$106.95 (1,362 products, 12 shown here)

- Replacement Universal Derailleur Hanger UDH Bolt and Washer – M12x1.0: $12.95 (in stock) — https://wheelsmfg.com/products/replacement-udh-bolt-and-washer-m12x1-0
- DROPOUT-FASTENER-11: $17.95 (in stock) — https://wheelsmfg.com/products/dropout-fastener-11
- Derailleur Hanger 716 – Revel Ranger V1: $45.95 (in stock) — https://wheelsmfg.com/products/derailleur-hanger-716-6061-aluminum-revel-ranger
- Incredibell Spring 2 Bike Bell: $13.95 (in stock) — https://wheelsmfg.com/products/incredibell-spring-2
- Incredibell Striker 2 Bike Bell: $13.95 (in stock) — https://wheelsmfg.com/products/incredibell-striker-2
- SOLO Single Speed Kit Replacement Parts: $5.95–$32.95 (in stock) — https://wheelsmfg.com/products/solo-single-speed-kit-replacement-parts
- Incredibell Ring-O-Ring: $13.95 (in stock) — https://wheelsmfg.com/products/incredibell-ring-o-ring
- Incredibell Raijin Bike Bell: $25.95–$26.95 (in stock) — https://wheelsmfg.com/products/raijin-bell
- Direct Mount 8 Bolt Gravel Chainrings: $106.95–$115.95 (in stock) — https://wheelsmfg.com/products/direct-mount-8-bolt-gravel-chainrings
- SRAM 3-Bolt Chainring Spider Bolt Kit, 3 Pack, M5, T25: $6.95 (in stock) — https://wheelsmfg.com/products/sram-8-bolt-chainring-spider-bolts-50-pack-m4-t20-copy
- SRAM 8-Bolt Chainring Spider Bolts, 50 Pack, M4, T20: $64.95 (in stock) — https://wheelsmfg.com/products/sram-8-bolt-chainring-spider-bolts-50-pack-m4-t20
- SRAM 8-Bolt Chainring Spider Bolts, 8 Pack, M4, T20: $11.95 (in stock) — https://wheelsmfg.com/products/sram-8-bolt-chainring-spider-bolts-8-pack-m4-t20

Products as published by the shop (read from the shop 2026-11-22; the shop last changed its products 2026-11-22; last change seen here 2026-11-22); prices and stock change.

## Prices
- Subtotal: €0,00

## Frequently asked questions

**My derailleur hanger is not listed on your website, can you help me find it?**
If you cannot find your derailleur hanger on our website, please email pictures of the front and back side of the hanger from your bike to info@wheelsmfg.com. If you do not have the hanger, please provide detailed photos of your frame where the derailleur hanger connects.

**I bent my derailleur hanger, what can I do?**
It’s best to replace it to ensure proper shifting and prevent further damage to your bike. You can use our Hanger Finder Tool to identify the correct replacement hanger for your bike. If you’re unsure, feel free to contact us at info@wheelsmfg.com for assistance.

**What grease do I use to install my bottom bracket?**
For steel or aluminum BB shells, use any quality grease. For titanium shells, an anti-sieze compound is recommended. For carbon shells, pease view this page: Grease for Carbon frames

**I have a ______ bike, can you tell me what bottom bracket I need?**
To determine proper fitment of a Bottom Bracket you will need the following information. shell width, shell inner diameter, crank spindle length, crank spindle diameter. If you enter these numbers into our bottom bracket finder tool online https://wheelsmfg.com/pages/bb-finder the products you need will appear.

**What's the difference between bearings?**
See our Bottom Bracket Bearing page for help in understanding the differences between available bearings.

**My BB bearings feel rough, what can I do?**
All Wheels Mfg bottom brackets are 100% serviceable. The bearings can be easily replaced with new bearings, or you can clean the bearings without removing them from the cups.

**Can I convert your BB from Shimano to SRAM or the other way around?**
Yes. The only difference in our BB cups between 24mm (Shimano) and 22/24mm (SRAM GXP) is the non-drive side bearing and outer dust seal. Both bottom brackets use the same 24x37x7 bearing on the drive side with a matching 24mm ID seal. For 24mm (Shimano) cranks, the non-drive side cup uses the same bearing and seal. For 22/24mm (SRAM GXP) cranks, the non-drive side cup uses a 22x37x8 GXP bearing and a matching 22mm ID dust seal.If changing your bottom bracket to a GXP compatible unit, you will also need to add a 24mm ID wave washer to the drive side between the dust seal and the crank arm.

**I can push my BB cup in by hand. Is this normal?**
It is not uncommon for BB cups to push in by hand without the need of a press tool. When the cups are fully tightened together, this will keep the BB cups secure in the frame. We see frame BB shell tolerances all over the board from tight to loose. If your frame is loose, you may need to use a tool on each cup to prevent both cups from spinning in the frame when tightening.

**Where to put spacers & wave washer with GXP cranks?**
Please see our Crank Spindle Spacers & Seals page for help.

**Do you have a bottom bracket for a BB86, BB92 and 30mm dia. spindle cranks?**
Due to the very small difference in diameters between a 41mm ID BB shell and a 30mm diameter crank, there is not enough room to fit a bearing into a BB cup, and fit that into the BB shell. The only current solution we have is the Enduro dual row, flanged direct fit bearing system. This BB kit will allow you to run a 30mm spindle crankset in a 41mm ID frame BB shell (BB86, BB92, PF92). Note that when used in a 86mm wide shell, the crank's overall spindle length should be at least 104mm.

**Where do all the extra spacers & seals that came with my BB go?**
All Wheels Mfg bottom brackets come with dust seals and a small selection of crank spindle spacers. Dust seals always fit directly against the bearings. Please reference this page for seal orientation.For most installations, the included spacers will be enough to properly position the cranks in the BB. Some installations may need additional spindle spacers, which can be purchased separately.A few cranksets include stock spacers and/or an adjuster that are too wide when used with Wheels Mfg bottom brackets. If these spacers and/or adjuster cause the bearings to bind, you will need to replace th

**Do you make a thread together bottom bracket for a BB86, BB92 and SRAM DUB spindle cranks?**
Due to the very small difference in diameters between a 41mm ID BB shell and a 29mm diameter SRAM DUB crankset, there is not enough room to fit a bearing into a BB cup, and fit that into the BB shell. The only current solution we have is the Enduro dual row, flanged direct fit bearing system. This BB kit will allow you to run a 29mm spindle SRAM DUB crankset in a 41mm ID frame BB shell (BB86, BB92, PF92).

**Where can I find bottom bracket replacement parts?**
Replacement parts list for all Wheels Mfg bottom brackets can be found HERE.

**What is the status of my order?**
You should receive automated emails with the invoice when your order has been processed as well as the tracking number once it has shipped. Our automated emails may go to the spam folder of your email inbox so please check there if you do not see them in your main inbox. If you still have any questions about the status of your order, please reach out to us at info@wheelsmfg.com with your order number/name on the order so we can assist in finding the status of your order.

**How long does it take to process and receive my order?**
Order cut off times are 1:30PM (Mountain Time) or 3:30PM (Mountain Time) for UPS Next/Second Day Air. If you place your order before the cut off time your order will be processed and shipped out the same day as you place it. Please check with the selected carrier to view estimated shipping times based on the shipping method selected with that carrier. Please note that delivery time frames are set by the carriers and are not guaranteed by Wheels MFG.

## Languages
- English

## Social profiles
- Instagram: https://www.instagram.com/wheelsmfg
- Facebook: https://www.facebook.com/wheelsmanufacturing/
- X: https://twitter.com/wheelsmfg
- YouTube: https://www.youtube.com/channel/UCDHXAa0Ifu6QRXo92m3UMsA

---
Source: AI Find Me directory (https://aifindme.com/b/wheels-mfg). Facts were read from https://wheelsmfg.com/ and last checked 2026-11-22; every listing is re-checked about every 7 days. Unclaimed listing. Not yet verified by the business owner.
JSON version: https://aifindme.com/b/wheels-mfg.json (it says where each fact comes from)
