StuckAtPrototype
Shops & Retail in Cedar Park · Web shop on Shopify · stuckatprototype.com
Build and learn with Damian, aka StuckAtPrototype, from YouTube. Damian

- Address
- Physical address: 1320 Arrow Point Dr suite 501 169, Cedar Park TX 78613, United States Map
- Country
- United States
- Languages
- English
- Ships to
- United States
- Shipping information
- Shipping page
- Returns
- within 30 days Returns page
What they sell
Web shop on Shopify: 5 products, $39.95–$203.95
AirCube - Populated PCB$39.95–$100.95Out of stock
Entrepreneurs Clock$202.95Out of stock
AirCube by StuckAtPrototype$80.95–$151.95Out of stock
Micro Racer Fully Assembled$203.95Out of stock
Micro Racer Kit$91.95–$151.95Out of stock
5 products, prices $39.95–$203.95, as published by the shop (read from the shop 26 h ago; the shop last changed its products 21 November 2026; last change seen here 26 h ago). Prices and stock change; the shop’s website has the current ones.
About
Home Assistant ready out of the box via Zigbee. No cloud, no subscriptions. Simply accurate, real-time air quality data on a device you can actually trust.Oh. And it's fully open sourced. The story began in 2019 with a launch of a Kickstarter. We didn't succeed. Bearing the weight of that failure for years, Damian (better known as StuckAtPrototype from Youtube) decided to open-source his creation; and it went viral. Combining his deep passion for electronics and learning Damian is now proud to offer hardware learning kits and to be inspiring others to learn Embedded Systems though fun, hackable gadgets. Works amazingly.
Services
- AirCube by StuckAtPrototype
- AirCube - Populated PCB
- Entrepreneurs Clock
- Micro Racer Kit
- Inside AirCube Pro
- A visible signal from across the room.
- See when levels rise.
- Know when to ventilate.
- Adjust the light. Pair your cube.
- Fully open source.
- The readings behind the glow. · Direct CO₂ measurement on Pro. VOC sensing on both models.
- Go from a color to the details.
- AirCube Home iPhone app
- Let your home respond.
- AirCube in Home Assistant
- AirCube specifications.
- Base sensors
- Pro sensors
- Watch AirCube in action.
- What AirCube owners noticed.
- Russell White
- Ryan Baker
- Pawel Zyla
- Daniel Seraphinoff
- Jason P.
- Stephen K.
- Jeff
- Tathagata Mitra
- Choose Base or Pro.
- Ships from Texas. 30-day satisfaction guarantee.
Prices
| Free worldwide shipping on orders | $99+ |
| Base | €80,95 |
| Selected | €80,95 |
| Entrepreneurs Clock | €202.95 |
Prices as shown on the website when it was last read; the business may have changed them since.
Frequently asked questions
Technical details
Processor ESP32-H2 Wireless Bluetooth for the iPhone app or Zigbee for Home Assistant. One mode at a time. No Wi-Fi required. Home Assistant ZHA and Zigbee2MQTT 2.x. A Zigbee coordinator is required. Power & USB 5 V over USB-C. USB supports both power and data. Controls Press the rear button to adjust brightness or turn the light off. Hold for 3 seconds to enable Zigbee pairing. Light IN-PI15TAT5R5G5B addressable RGB LEDs with a diffused top. Dimensions 49 × 49 × 36 mm Enclosure 3D-printed PLA. Designed and built in Texas. Open source Firmware, PCB schematics and enclosure files are available
Which should I choose: Base or Pro?
Choose Base to track VOCs, temperature and humidity around cooking, cleaning and workshop activities. Choose Pro if you also want direct CO₂ readings in bedrooms or offices and automatic dimming as the room darkens.
Does AirCube measure CO₂ directly?
AirCube Pro does: its SCD41 sensor measures CO₂ directly. Base’s eCO₂ reading is an estimate derived from VOCs. Choose Pro if direct CO₂ measurement matters to you.
Does it work right out of the box?
Yes. Connect USB-C power to use AirCube’s changing glow. No account, Wi-Fi setup or hub required. Allow about three minutes for the VOC sensor to warm up; a new sensor also needs about an hour of conditioning on first use.
Does it need Wi-Fi or a phone?
No. AirCube works with USB-C power alone, with no cloud account or subscription. For more detail, choose the free AirCube Home iPhone app over Bluetooth, Home Assistant over Zigbee, or a desktop app over USB.Get AirCube Home for iPhone
Do I need Home Assistant?
No. AirCube works on its own. Add Home Assistant for history and automations.Zigbee requires a coordinator. For all readings, ZHA needs the AirCube quirk; Zigbee2MQTT 2.x needs an external converter.Hold AirCube’s button for 3 seconds to pair.Follow the setup guide
Is there an Android app?
The Android app is in development. AirCube works without a phone. For USB readings, use AirCube Web in desktop Chrome or Edge with a data-capable USB-C cable.
Is the light too bright at night?
AirCube Pro dims automatically as the room darkens. On Base, press the button to cycle brightness levels, including off.
Can I turn the light off?
Yes. Press AirCube’s rear button to cycle brightness, including off. You can also adjust brightness through Home Assistant when connected.
What if AirCube is not for me?
Email contact@stuckatprototype.com within 90 days for a prepaid return label and a full refund.
What if a part breaks?
If a part fails in the first year, Damian ships a replacement part. Email contact@stuckatprototype.com for help.
What does the color mean?
On current firmware, Base’s color follows its VOC Level. Pro uses whichever indicates poorer air: its VOC Level or CO₂ level. The glow shifts gradually from green through yellow and orange to red.See the color guide
What can make the color change?
AirCube can show VOC changes from cooking, cleaning products, candles, soldering, 3D printing, paint, adhesives and new furniture. Pro also shows CO₂ changes as people spend time in a closed room.
Where should I put it?
Put AirCube where you spend time: your desk, nightstand, kitchen counter or workshop bench.
How long does the sensor need to warm up?
Allow about three minutes after power-on for the VOC sensor to stabilize. A new sensor also needs about one hour of conditioning on first use. Readings may be inaccurate during these periods.
Share
Link Close share Copy link
Does it really work right out of the box?
Yes. Plug AirCube into any USB-C port or adapter. Within seconds the LED responds to your air. No app to download, no account to create, no Wi-Fi to configure, no hub to buy. Most air quality monitors take multiple attempts to set up. AirCube skips all of that.
Do I need Home Assistant to use AirCube?
No. AirCube works great on its own as a simple color-based air monitor. Home Assistant is optional.
How accurate is it?
AirCube uses the ENS16x and ENS210 — reliable, well-documented sensors designed for indoor air quality monitoring.
What does the color actually mean?
Green means your air quality is in a normal range. Yellow means VOC levels are elevated. Consider opening a window or turning on a fan. Red means your air needs immediate attention. Ventilate the space. You don't need to interpret a number or look anything up. The color is the answer.